 |
8 February 2010
RALLIART INC. |
|
|
For the LANCER EVOLUTION X (CZ4A)
Group-N competition use
"ø33mm Restrictor & Suction Pipe Set" Goes on Sale
- Applicable to the change of 2010 FIA Group-N vehicle regulation (VO homologated parts)
- Realized to keep the maximum inflow volume and the efficiency -
|
ø33mm Restrictor |
|
ø33mm Restrictor and Suction Pipe Set |
|
|
RALLIART INC. (President: Masao Taguchi) has additionally made available "ø33mm Restrictor and Suction Pipe Set for ø33mm Restrictor" for Lancer EvolutionX(CZ4A) Group-N competition use which are applicable to the change of 2010 FIA Group-N vehicle regulation.
"ø33mm Restrictor and Suction Pipe Set for ø33mm Restrictor" for Group-N are applicable to the change of 2010 FIA Group-N vehicle regulation and has kept the maximum inflow volume applicable to the vehicle regulation and also has realized the maximum efficiency by means of the simulation of air suction. These parts would support the consecutive win after 2010 at FIA Production Car Rally Championship (PWRC) which Mitsubishi Lancer Evolution customers has won since 2008.
Meanwhile, Suction Pipe Set is the same as it for ø32mm Restrictor. So, customers who already have used Ralliart made Suction Pipe Set can apply only by the change of ø33mm Restrictor.
*This item is for competition use only. When driving on public roads you must reinstall the original standard E.C.U.
■ Features
|
| - |
Applicable to the change of 2010 FIA Group-N vehicle regulation. |
| - |
Realized the maximum suction efficiency by the simulation of air suction. |
| - |
Reduced the weight at unnecessary part and realized to lighten 17% of the weight compared to Ralliart made ø32mm Restrictor for Lancer Evolution X. |
| - |
Made of high tension aluminum |
| - |
Kept the anti-corrosion and endurance by the hard alumite treat |
|
■ The content of "ø33mm Restrictor and Suction Pipe Set for ø33mm Restrictor"
| Product name |
Product number |
Price Including tax
(before tax) |
Remarks |
| ø33mm Restrictor and Suction Pipe Set |
RA154242S2 |
121,800yen(116,000yen) |
Restrickor: High tension aluminum
Suction Pipe: aluminum |
| ø33mm Restrictor |
RA151182S2 |
39,900yen(38,000yen) |
Restrickor: High tension aluminum |
| * |
Price is the suggested retail price as of February 2010 not including the installation charge. |
■ Applicable model : LANCER EVOLUTION X (CZ4A)
■ Remarks
| - |
When the installation of these parts, it is necessary to process the bolt hole at compressor housing. |
| - |
When the installation of these parts, please refrain from Installing the engine E.C.U for ø32mm Restrictor. |
| - |
When customers participate in the competition with the installation of this Kit, it is necessary to confirm whether this kit conforms each competition's regulation or not. |
|